(1) Sills or belt courses may project not over 18 inches into a required setback.

(2) Movable awnings may project not over three feet into a required setback.

(3) Chimneys, fireplaces or pilasters may project not over two feet into a required setback.

(4) Fire escapes, stairways and balconies which are unroofed and unenclosed may project not over five feet into a required rear setback or not over three feet into a side setback and shall not project into a required front setback of a multiple dwelling, hotel or motel.

(5) Hoods, canopies or marquees may project not over three feet into a required setback.

(6) fences, walls and hedges shall be permitted in the required setback, subject to this chapter.

(7) parking may be located in a required front or rear setback for single-family and two-family dwellings.

(8) In the commercial and industrial zoning districts, with the exception of any property abutting State highway A1A and located north of the existing centerline of Central Boulevard, required offstreet parking spaces may be permitted within ten feet of the front lot line. parking may be permitted on a required side setback on a corner lot in the commercial zoning district.

(9) No required setback or landscape buffer shall be used for any parking space or backout area, except as specified in subsections (7), (8) and (11) of this section.

(10) Open, enclosed porches, platforms or paved terraces not covered by a roof or a canopy and which do not extend above the level of the first floor of the building may extend or project into the required setback.

(11) Primary parking may be located in a required front setback for multiple-family dwellings.

(12) Signs for on-site advertising shall be in conformance with chapter 94 pertaining to signs.

(13) Roof overhangs (eaves) may project not over two feet into a required setback.

(14) Air conditioner units may project not over five feet into a required rear setback.